top of page

How to Watch a Leaf Make Oxygen: The Floating Leaf Disk Lab

Writer: Hannah Wild
Hannah Wild
5 days ago
2 min read

Plants give off oxygen, but you cannot see it. So how do you catch a leaf in the act?

With a hole punch, some spinach, a syringe and a spoonful of baking soda.

How it works

A leaf is full of tiny air spaces, which is why a piece of leaf floats. If you pull that air out and let water in, the piece sinks. Put it under a bright light, and if the leaf is making oxygen, the gas collects in those spaces and the disk floats back up.

Baking soda dissolved in the water supplies the carbon dioxide the leaf needs. A single drop of dish soap helps the water soak in.

The lab in five steps

  1. Punch 20 disks from fresh spinach, between the veins.

  2. Pull the air out of the disks with a syringe so they sink.

  3. Put 10 disks in a cup under a bright lamp, and 10 in a cup you cover so it is dark.

  4. Every 2 minutes for 20 minutes, count how many disks are floating in each cup.

  5. Graph both cups.

The disks in the light rise. The disks in the dark stay down. That dark cup is your comparison: it shows the light caused the result.

A note for science nerds

Leaves also use oxygen for cellular respiration at the same time, so the rate the disks rise is an indirect measure of net photosynthesis, not the whole story.

The tricky part

Getting the disks to sink. Use fresh, thin leaves. If they will not sink, add one more drop of soap and try again. Practice once before you teach it.

Want the ready-to-teach version?

I made a 6-page version for grades 6 to 7 with a lesson plan, a student reading, a lab record with a graph, an answer key and troubleshooting. It is aligned to NGSS MS-LS1-6 and takes 50 to 60 minutes.

More science from me on Instagram: @hannah_ology.

 
 
 

Comments


bottom of page